Best sellers
35 products
Sort by:
35 products
Custom lengths for your furniture and large meeting tables
Create an integrated electrical installation for your furniture. The RH2 trunking can be cut to fit the furniture, then accepts SFC3 electrical segments in the required locations. Complete the non-electrified sections with SFC2D blanking panels cut to the desired length. A solution designed for offices, workstations, and large meeting room tables.
A modular design adapted for recessed installation
Just like the SH1 trunking, you choose the areas to electrify and the sections to blank off. With the RH2, the project remains integrated into the furniture.
A blank trunking to configure
Supplied in a cuttable 150 cm length, the trunking forms the profile of your installation. SFC3 segments, SFC2D blanking panels, end caps, and other necessary components must be selected separately.
A furniture-recessed project
Adapt the length and the distribution of electrified areas to your furniture or table. The RH2 is not presented as a room-perimeter solution: its use is focused on integration into furniture.
Configure the useful areas of your table
Large meeting tables
Provide electrified areas where participants need to plug in their devices. The intermediate sections are closed with SFC2D.
Desks and workstations
Integrate a length adapted to the furniture and place the SFC3 segments according to the workstation layout.
Custom-built furniture
Configure the installation according to the furniture dimensions and power requirements, without electrifying the entire length.
A discreet but visible finish
The recess width is 7 cm, for a total profile width of 8 cm. After installation, it protrudes 2 mm from the support: it is therefore neither invisible nor completely flush.
How to combine SFC3, SFC2D and DS4?
| Component | Role in your installation |
|---|---|
| RH2 trunking | Aluminium profile designed to be recessed into furniture. |
| SFC3 electrical segment | Creates the electrified areas designed to receive EUBIQ sockets. |
| SFC2D blanking panel | Closes the non-electrified sections. It can be cut to complete the SFC3 and achieve the desired final length. |
| DS4 for RJ45 | Allows RJ45 sockets to be integrated in a fixed location between two SFC3 segments or at the end of the installation, instead of a section of SFC2D. The RJ45 sockets installed this way cannot be moved along the track. |
| End caps | Close the ends of the profile to complete the installation. |
Example for a large meeting table: provide several SFC3 areas at the locations where participants plug in, then complete the intermediate sections with fitted SFC2D blanking panels. If you want RJ45 connections, reserve their fixed location using DS4 between two SFC3 segments or at the end of the installation, replacing the SFC2D in that location.
RH2 profile specifications
Before machining the furniture: distinguish the 7 cm recess width from the 8 cm total profile width. Check the other dimensions of the housing, clearances, and fixings using the technical documentation and the selected configuration.
Components to provide
Configure your project with the RH2 trunking, SFC3 electrical segments, SFC2D blanking panels, end caps, EUBIQ sockets, and the fixing and connection components suited to your configuration. Add DS4 if you want to integrate RJ45 sockets in fixed locations between two SFC3 segments or at the end of the installation, instead of the SFC2D. The blank trunking is not a pre-power track.
SFC3 areas are designed for EUBIQ sockets, including models corresponding to the different types of sockets by country. They do not directly accept standard wall sockets from other brands.
Prepare your custom installation
Define the location in the furniture
Measure the useful length and check the material, available thickness, fixing, and power supply routing before preparing the housing.
Distribute the electrified areas and RJ45 sockets
Place the SFC3 segments according to the workstations to be powered and provide SFC2D for the remaining sections. For the RJ45 sockets, reserve fixed locations using DS4 between two SFC3 segments or at the end of the installation, instead of a section of SFC2D.
Adjust the lengths
The aluminium trunking is cut with a hacksaw. For a more professional cut, use a circular saw equipped with a blade suited for aluminium. Also cut the SFC2D blanking panels to the required lengths. Secure the pieces, follow the tool's safety instructions, and deburr the edges. Do not confuse these adjustments with cutting the SFC3 electrical segment.
Prepare the housing and fix the profile
Provide a recess width of 7 cm. Follow the other dimensions and requirements of the technical documentation for machining and fixing. The total profile width is 8 cm and, after installation, it protrudes 2 mm from the support.
Assemble and connect
Install the components and end caps according to their documentation. The electrical installation must be carried out without power by a person qualified in electricity.
Frequently asked questions
What is the common point with the SH1 trunking?
The modular design principle is the same: SFC3 areas electrify the useful locations and the cut SFC2D completes the other sections. The RH2 is designed for recessed installation in furniture, while the SH1 is surface-mounted.
Can the installation be adapted to a large meeting table?
Yes. Configure the recessed length according to the furniture dimensions and distribute the electrified areas according to the seats to be served. Prepare the configuration and connection with a person qualified in electricity.
Can RJ45 sockets be added?
Yes, via DS4. The RJ45 sockets are then fixed between two SFC3 segments or at the end of the installation, instead of a section of SFC2D. They cannot be moved along the track: their location must be planned when configuring the installation.
Should the entire length be electrified?
No. SFC2D blanking panels close the sections without an SFC3 segment and are cut to achieve the desired length.
What are the integration dimensions?
The recess width is 7 cm, for a total profile width of 8 cm. It protrudes 2 mm from the support after installation and is therefore not completely flush. Consult the technical documentation for the other dimensions of the housing.
Is the RH2 designed for a partition?
No, it was developed for recessed installation in furniture. Any use in a partition requires a check of the material and the fixing method; it should not be considered compatible by default.
The RH2, to the measure of your furniture.
A recessed length adapted to the furniture and electrified areas where you need them.
The pair — a neat finish at both ends of the profile
Close the open ends of your EUBIQ RH2 raceway with this pair of dedicated end caps, supplied with fixing screws. They conceal the opening of the profile to neatly finish your installation recessed into furniture, particularly desks and large conference tables.
Why choose dedicated end caps?
Closes the ends
They close the open ends of the RH2 raceway and conceal the interior of the profile at the start and end of the run.
Designed for RH2
Accessories designed for the RH2 profile, to be selected according to the raceway model in your installation.
Sold in pairs, screws included
Two end caps with their fixing screws. Count the open ends to be finished to determine the quantity required.
Two finishes
Choose Aluminium or Black depending on the desired variant and the appearance of your installation.
End cap or SFC2D blanking plate?
SFC2D blanking plate
Closes the non-electrified longitudinal sections of the raceway. It completes areas equipped with SFC3 electrical segments.
RH2 end cap
Closes the end of the profile. It does not replace the SFC2D or the components of the electrified sections.
Technical specifications
To finish your RH2 installation
Desks and workstations
Finish the ends of RH2 profiles recessed into furniture.
Large conference tables
Complete the finish of your RH2 run by assembling it with the appropriate components.
Preparing the run finish
Identify the open ends to be closed, check the chosen finish, then fix the end caps with the screws supplied, according to the RH2 documentation. An installation containing several independent lengths may require several pairs.
The RH2 is designed to be recessed into furniture. These end caps close the ends of the profile; they do not change its protrusion height and do not indicate the watertightness of the assembly. Any work on the electrical installation must be carried out while disconnected from the power supply by a person qualified in electrical work.
Frequently asked questions
What are these end caps used for?
They close the open ends of the RH2 raceway to conceal the interior of the profile and complete the presentation of the installation.
Are they sold individually?
No, they are sold in pairs, i.e. two end caps, with fixing screws included.
How are they fixed?
RH2 end caps are fixed by screwing. The screws required for their fixing are supplied with the pair.
What is the difference with SH1 end caps?
The role is the same, but each end cap must be chosen for the profile concerned. This data sheet presents the end caps designed for the RH2.
What is the difference with the SFC2D?
The SFC2D closes a non-electrified longitudinal section. The end caps close the ends of the profile. These functions are distinct.
What finishes are available?
Aluminium and Black, depending on the selected variant.
A neat RH2 installation right to the ends.
The pair · Fixing screws included · Aluminium or Black finishes · RH2 raceway
High-performance shielded keystone — up to 500 MHz
Compact, robust, and designed for uncompromising network transmission. This Cat 6E keystone module fits perfectly into the EUBIQ DS3 and DS4 wall boxes for professional Ethernet installation in residential and commercial settings.
What is a Category 6E RJ45 keystone jack?
A keystone jack (or keystone module) is the central element of a recessed network socket. It fits into a wall box and provides a clean termination for a copper network installation. Category 6E refers to an enhanced version of Cat 6, offering superior performance in terms of speed and interference reduction — ideal for demanding networks.
This jack is designed to be field-wired: you strip your network cable, connect the 8 wires to the built-in IDC contacts, and you get a network wall socket worthy of a professional installation.
Key features of the Cat 6E RJ45 jack
The metal shielding protects the signal from electromagnetic interference (EMI/RFI), essential in environments with nearby power cables or electrical equipment.
Compatible with speeds up to 10 Gbps and frequencies up to 500 MHz. Perfect for modern network installations, 4K video, streaming, or IP security systems.
The IDC contacts allow for quick and precise wiring without soldering. Compatible with F/UTP, S/FTP, or U/FTP category 6 or 6A network cables.
Dimensions of 5 × 2 × 2 cm weighing only 19 g. Fits perfectly into the DS3 and DS4 wall boxes in the EUBIQ range, for an attractive and neat finish.
Wall box compatibility: DS3 and DS4
This RJ45 keystone jack is designed to fit effortlessly into the EUBIQ range wall boxes:
For a multi-port RJ11 / RJ45 configuration.
Aluminum version, for a premium RJ11 / RJ45 finish.
This compatibility ensures a consistent and attractive installation throughout your network, whether you are renovating or building new.
How to wire a Cat 6E RJ45 keystone jack?
Strip approximately 3 cm of the cable jacket, untwist the pairs, and separate the 8 wires according to the T568A or T568B color code (indicated on the module body).
Place each wire in its corresponding position according to the color coding on the jack. Press firmly to ensure a good electrical contact.
Connect the cable's braid or foil shield to the keystone's ground clamp to ensure shield continuity and effective protection against interference.
Push the jack firmly into the designated slot in the DS3 or DS4 wall box. A click confirms it is in place. Your network socket is ready!
Complete technical specifications
What is this keystone jack recommended for?
Create Ethernet wall sockets in every room for a stable and fast wired connection — far superior to Wi-Fi for gaming, streaming, or working from home.
Wire your workstations, IP phones, or IP security cameras with a reliable and future-proof infrastructure.
Easily replace a faulty jack or add new network points to your existing installation.
Shielding is a major asset in industrial premises, commercial kitchens, or any space with electrical equipment generating interference.
Frequently asked questions
Cat 6E is an enhanced version of standard Cat 6, offering better immunity to interference and extended bandwidth (up to 500 MHz compared to 250 MHz for Cat 6). It is better suited for modern 10 Gbps network infrastructures.
No. Wiring is done directly to the IDC contacts without a crimping tool. A simple punch-down tool can make installation easier, but is not essential.
Technically yes for connecting the wires, but the shielding benefit will be lost if your cable is not also shielded (F/UTP, S/FTP…). To fully benefit from Cat 6E performance, choose a shielded cable of the same category.
Yes, the jack supports both wiring standards. The color coding is indicated directly on the module body to prevent any mistakes.
This EUBIQ shielded Category 6E RJ45 keystone jack guarantees a clean, durable, and high-performance network installation. Whether you are equipping a home or an office, you are laying the foundation for a reliable wired connection for years to come.
Add to cart
The modular accessory that frees up your worktop
Designed for the EUBIQ SH1 profile, whether used as a track or trunking, this 400 mm bar combines translucent plastic fasteners with an aluminium support. It allows you to hang spatulas, ladles and utensils under your SH1 profile, without screws or additional drilling.
Why choose this support bar?
Designed for the SH1 profile, whether used as a power track or modular trunking. It snaps into place without additional screws.
Hang spatulas, ladles, tongs and other utensils within easy reach. Free up your drawers and worktop.
The fastening part is made of translucent plastic; the support bar is made of aluminium. The accessory is therefore not entirely made of aluminium.
Combine it with other SH1-compatible EUBIQ accessories: shelves, storage and sockets. The profile adapts to your needs.
Technical specifications
Installation in 3 steps
Slide the translucent plastic fasteners into the slots provided on the EUBIQ SH1 profile, whether used as a track or trunking.
A simple click is all it takes to hold the bar firmly in place, without screws or additional drilling.
Hang hooks, spatulas, ladles or tongs directly on the bar. Your worktop is now free!
Tip: For even more effective organisation, combine several compatible accessories from the EUBIQ SH1 system: shelves, storage and sockets.
Who is this support bar for?
Want to organise your kitchen effectively? This bar complements your SH1 profile, whether used as a track or trunking.
The EUBIQ SH1 modular system allows you to offer a functional layout tailored to your customers' needs.
- For kitchens equipped with an EUBIQ SH1 profile, as a track or trunking
- To optimise the space above the worktop
- Suitable for kitchens with limited floor or worktop space
- Compatible with standard kitchen bar hooks and accessories
Frequently asked questions
Yes. It is suitable for the EUBIQ SH1 profile in both configurations: power track or modular trunking. It is not designed for standalone use.
No. The fastening part is made of translucent plastic, while the support bar is made of aluminium.
No, no additional drilling is required for the bar itself. It snaps directly onto the already installed SH1 profile.
It is designed to support common kitchen utensils (spatulas, ladles, tongs, etc.). For information on the maximum permissible load, please refer to the EUBIQ technical documentation.
Yes, you can position and combine several bars depending on the length of your SH1 profile and your needs.
Technical documentation
This accessory is a fit-out and organisation product. It does not constitute electrical safety equipment. For any work on the electrical installation, please consult a qualified electrician.
No more cluttered worktops: your utensils are within easy reach, suspended on an aluminium support with translucent plastic fasteners.
A small accessory, a big difference in everyday life.
Add to cart
Organize your countertop in one click
Pack of 4 hooks made entirely of translucent plastic, to be clipped directly onto the EUBIQ SH1 profile, whether used as an electrical track or a cable duct. No screws or additional drilling required, keeping your utensils within easy reach.
Why choose these hooks?
The hooks clip directly onto the EUBIQ SH1 profile, whether used as a track or a cable duct. No drilling or additional screws required.
Ladle, spatula, tea towel, small colander: your utensils remain accessible without cluttering the countertop.
The mounting bracket and hook are made of translucent plastic. Unlike the utensil support bar, these hooks do not feature an aluminum support.
Move, reposition, or remove your hooks to adapt the storage to your needs.
Compatibility
These hooks attach to the SH1 profile. They are suitable for both the SH1 electrical track and the customizable SH1 cable duct. They complement your countertop installation to help organize utensils.
Technical specifications
Installation in 4 steps
Identify the location on your SH1 profile where you want to attach the hook. Leave enough space between each hook to comfortably hang your utensils.
Slide the upper part of the hook into the groove of the SH1 profile, tilting it slightly, then push it down to snap it into place.
A slight click confirms that the hook is in place. Check that it is securely attached before hanging your items.
Repeat the process for the 4 hooks and organize your kitchen according to your needs. You can move them without tools.
Frequently asked questions
Yes, the hooks are suitable for the EUBIQ SH1 profile in both configurations: electrical track or customizable cable duct.
They are made entirely of translucent plastic, including the mounting bracket. They do not feature an aluminum support.
These hooks are designed for lightweight utensils and objects: spatulas, ladles, tea towels, or tongs. Avoid heavy objects and loads that could deform the plastic or cause the hook to unclip. See the technical documentation for usage limits.
The number depends on the available length of your SH1 profile and the accessories already installed. Leave enough space between the utensils.
Yes. The clip-on design allows you to remove and reposition them according to your needs, without additional drilling.
No, they are sold in a pack of 4 hooks.
The EUBIQ SH1 modular ecosystem
The EUBIQ SH1 profile, whether used as a track or a customizable cable duct, allows you to combine electrical components and accessories suited to your installation. These hooks complement the organization of your kitchen without cluttering the countertop.
Organize your storage according to your needs and the available space on your SH1 profile.
Additional information
Four translucent plastic hooks to keep your utensils within easy reach.
Complete your SH1 profile and clear your countertop.
The compact module that turns your trunking into a network connection point
House a Keystone connector (RJ45, USB, HDMI) directly in your EUBIQ SH1 or RH2 trunking. Installation in seconds, sleek aluminium finish, zero wall drilling. The professional, discreet, and modular network solution.
What is the DS4 housing used for?
The DS4 housing is a modular Keystone-format support designed to be recessed into compatible electrical trunking and skirting boards. It acts as an interface between the trunking and the connector of your choice, allowing you to create a neat and functional RJ45 wall socket integrated into the trunking, without drilling into the wall.
It is the ideal solution for network installations in open spaces, meeting rooms, landscaped offices, or any area where network cables need to remain organized and accessible.
Why choose the DS4?
Versatile
Accepts RJ45, USB, and HDMI connectors in standard Keystone format. A single housing for multiple network and multimedia uses.
Immediate installation
Tool-free clipping in seconds. No wall drilling required: the module clips directly into the trunking.
Ultra compact
Only 30 × 27 mm and 16g. Reduced dimensions that fit without cluttering the space available in the trunking.
Sleek finish
Plastic housing with an aluminium finish, available in silver and black. Fits perfectly in both professional offices and home installations.
Technical specifications
Compatible connectors
The Keystone format is a widely used standard in network and multimedia installations. The DS4 housing accepts different types of modules:
RJ45 Cat. 5e / 6 / 6A
For Ethernet network. High-speed wired connection for workstations and network equipment.
USB Keystone
For charging or data transfer. Add a USB port accessible directly from the trunking.
HDMI Keystone
For high-definition video. Ideal for meeting rooms and presentation areas.
Warning: Always check the depth of the Keystone connector you intend to use before purchasing. Some deeper modules may not fit correctly in the trunking depending on the available rear space.
Compatibility with EUBIQ trunking
The DS4 housing is designed exclusively to fit into two trunking models from the EUBIQ range:
SH1 Trunking
337.5 mm brushed aluminium chassis for elegant wall mounting. Ideal for exposed installations in offices and workspaces.
RH2 Trunking
337.5 mm recessed track chassis, aluminium finish. Perfect for recessed installations and custom designs.
These trunking systems are designed to accommodate standardized modules (electrical sockets, RJ45 ports, multimedia connectors). The DS4 clips into them easily, without any specific tools.
Installation in 5 steps
Choose your connector
Select your Keystone module (RJ45, USB, HDMI), verifying the depth is compatible with your SH1 or RH2 trunking.
Clip the module
Insert the Keystone module into the DS4 housing. The locking mechanism is simple and requires no tools.
Insert into the trunking
Place the housing + connector assembly into the available slot in your SH1 or RH2 trunking.
Connect the cable
Connect your network cable to the back of the RJ45 Keystone connector according to T568A or T568B wiring.
Close the trunking
Your integrated RJ45 socket is ready for use, for a clean and professional network installation.
Frequently asked questions
Is the DS4 compatible with RJ45 Cat. 6A connectors?
Yes, provided that the depth of the Cat. 6A Keystone module is compatible with the depth available in the trunking. Check the Keystone core dimensions before purchasing.
Can this housing be used in trunking other than SH1 and RH2?
The DS4 is specifically designed for EUBIQ SH1 and RH2 trunking. Compatibility with other trunking brands (Legrand, Hager, etc.) is not guaranteed.
Does the DS4 housing come with an RJ45 connector?
No, the DS4 housing is sold alone (without a connector). The RJ45 Keystone module must be ordered separately according to your needs (Cat. 5e, 6, 6A, etc.).
How many housings can be installed in one piece of trunking?
The number of housings depends on the number of available slots on your trunking, as well as the other modules already installed (electrical sockets, switches, etc.).
What is the difference from a standard wall-mounted RJ45 socket?
A classic wall-mounted RJ45 socket is recessed into a wall box. The DS4, however, clips directly into surface-mounted trunking (SH1 or RH2), without drilling into the wall. Ideal for offices and professional spaces where recessed installation is not possible.
The EUBIQ DS4 housing turns your trunking into a true network connection point.
Compact, stylish, universal Keystone compatible — it installs in seconds.
DS3 enclosure for RJ45 keystone connector
Material: PlasticDimensions : 32mm x 65mm x 20mm
Weight : 6.5 g
Recommended connector: Keystone clip
Finish: Aluminum
The DS3 enclosure for keystone connector (RJ11, RJ45, HDMI, USB, RCA, etc.) is compatible with RH1 cable trays and VSF CMB tracks.
Additional information
- Brand: EUBIQ
- Weight: 17 g
- Dimensions (L × W × H): 7 × 3 × 1 cm
A coiled cord that connects directly to all Eubiq power tracks. Its extended length is 1.2 m. The cable ends with an IEC C5 "Mickey" connector. Electrical specifications: 220 V and 16 A. The red indicator light shows when power is supplied.
A cord for your connection
The CCS5 comes with a black coiled cable, unlike the PLT16, which is a cable-mount socket. It connects directly to all Eubiq power tracks and offers an extended cable length of 1.2 m.
Technical specifications
| Model | CCS5 |
| Type | Coiled cord |
| Brand | EUBIQ |
| Reference | 2040-0002-0412 |
| Voltage | 220 V |
| Current | 16 A |
| Indication | Red power-on indicator light |
| Cable | Black coiled |
| Extended cable length | 1.2 m |
| Indicated dimensions (L × W × H) | 32 × 14 × 1 cm |
| Cable termination | IEC C5 "Mickey" |
| Connection | All Eubiq power tracks |
Compatibility and connection
Eubiq cords, including the CCS5, as well as the PLT16 cable-mount socket, are compatible with all Eubiq power tracks. Observe the CCS5's 220 V and 16 A specifications as well as the manufacturer's instructions for the equipment to be connected.
Frequently asked questions
What does the number 5 mean?
The number 5 in CCS5 corresponds to the IEC C5 cable termination, also known as "Mickey", as with the CSP5-15.
What is the red indicator light for?
The red indicator light shows when power is supplied to the cord.
How does it differ from the PLT16?
The PLT16 is a cable-mount socket. The CCS5 is a cord with a black coiled cable that has an extended length of 1.2 m. Both are compatible with all Eubiq power tracks.
What are the electrical specifications?
The CCS5 is designed for a voltage of 220 V and a current of 16 A.
Does the 1.2 m length refer to the extended cable?
Yes, 1.2 m is the length when the coiled cable is extended.
What does it connect to?
The CCS5 connects directly to all Eubiq power tracks.
Follow the documentation for the cord and the track. For any work on the installation wiring, consult a qualified electrician and work with the power turned off.
Showing 32/35
NextCollections featured
The French specialist in designer electrical tracks since 2008. Exclusive Eubiq importer in Europe — Dilectro Ltd.
The French specialist in designer electrical tracks since 2008. Exclusive Eubiq importer in Europe — Dilectro Ltd.
- Choosing a selection results in a full page refresh.
- Opens in a new window.